Tires/Tubes

- Shim adds support to Presta stem used in a Schrader rim

Among our most versatile drop bar tires, the Venture delivers optimal performance across the widest range of conditions to serve as a truly set-it-and-forget-it gravel tire for riders who demand traction across a wide variety of terrain. Elevated centerline ridges provide consistent working edges that dig in whether hammering up a climb or leaning into a turn. Two rows of outer knobs provide confidence regardless of how hard you’re cornering while also providing substantial sidewall protection. Venture is the tire of choice when the destination is unknown but you’re sure to encounter a variety of terrain along the way. - The large, high-volume footprint of each Venture tire allows for more working edges of the tread to always be in contact with the terrain. - Rounded profile with vertical channels to enhance cornering characteristics. - High-volume casing enables comfortable ride. - Dual Compound Rubber means a fast-rolling tire with great cornering traction.

The Vittoria Agarro trail tire, Enduro inspired performance meets XC efficiency for your Trail bike. The Agarro trail tire is deigned to take you there and back, with a tread profile that gives considerably more grip than an XC tire, but with less bulk than an Enduro tread. - Leading edge steps for fast rolling (like a ramp), but better climbing in technical terrain at slow speeds - E-bike compatible tread profile is then wrapped on Vittoria’s tubeless-ready Trail casing, complete with APF inserts and sidewall protection, for added stability and protection

The Air-Liner is a high-quality polymer insert that replaces a portion of the air volume in the tire. This trait, combined with the shape, provides a tunable system that enhances your ride performance. The Air-Liner sidesteps the traditional compromise of stability vs. grip and allows your tires to remain stable, grippy, and controlled, even at low pressures. The Air-Liner is designed using a round cross-section with channels on the top and bottom. The top channel provides room for the tunable air chamber that sits directly beneath the tire tread. Upon impact, the corner edges of the channel flex first. This allows the tread to remain flexible, which increases traction without sacrificing impact resistance. The bottom channel allows for easy fine-tuning of the air chamber and allows for full compatibility of all valve core styles. The round cross-section shape mimics the natural shape of the tire and supports a greater contact area within the sidewalls of the tire casing. Side-to-side tire stability is increased, yet the tread remains soft and grippy. This improves cornering, climbing, and braking performance. - Protection: Both wheel and tire are protected by the Air-Liner insert. By cushioning impacts from within the tire, your expensive rim remains protected while eliminating flats caused by rim-strike impacts. - Control: The Air-Liner insert replaces air volume in the tire. The reduced air volume allows the tire to compress and rebound in a more controlled manner compared to standard tubeless systems. - Performance: Side-to-side tire stability is increased, yet the tread remains soft and grippy. This improves cornering, climbing, and braking performance. - Durability: This highly durable polymer material has been tested to a projected life of 2000 hours under normal riding, or 1 full hour of run-flat downhill use under a typical rider. - Air-Liner increases control, durability, performance, and protection of both tire and wheel. - Sold individually (single tire). Compatibility - Small: 1.9 – 2.25-inch wide tires - Medium: 2.25 – 2.5-inch wide tires - Large: 2.5 – 2.7-inch wide tires - X-Large: 2.7 – 4.0-inch wide tires

The Martello Race tire has been developed to provide the best combination of riding feeling and performance for technical trails at maximum speed. The design provides performance you expect on the most demanding and wide range of Enduro and DH courses. Start with a World Championship proven TNT bead, add the proprietary 4C Graphene compound, and top it off with a moto-inspired tread design with progressive width siping. - Progressive feel on the effective edge, allowing for that fine-touch tactile feel that top racers expect - The insert below the tread provides additional puncture protection - Progressive sipe-width pattern provides tactile grip at the knob surface, without sacrificing speed or grip - Moto-block square knobs offers stability and durability - Whether shredding rocks, roots, or mixed terrain, Martello delivers

Martello hammers home the performance you expect, on the most demanding Enduro and DH courses. Looking for the one tire to tackle a wide range of courses? The Martello features a World Championship proven TNT bead, add the proprietary 4C Graphene compound, topped off with a moto-inspired tread design and progressive width siping. This last part is key, and provides for a progressive feel on the effective edge, allowing for that fine-touch tactile feel that top racers expect. This design provides for a progressive feel on the effective edge, allowing for that fine-touch tactile feel that riders expect. Whether shredding rocks, roots, or mixed terrain, Martello delivers.

The new Vittoria Mazza combines years of athlete input with cutting-edge tread technology, raising the bar on the mixed terrain Enduro tire category. Starting with a defined center tread, the Mazza uses deep siping in the direction of rotation, allowing the tire to roll fast while still opposing drift, especially in off-camber terrain. The stepped leading edge rolls like a ramp but digs in on climbs, making Mazza a top choice for both front and rear use. Substantial spacing was designed into the center tread to provide braking traction, while also accelerating mud clearing. Cornering on the Mazza is handled by Vittoria's trademark progressive sipe width technology, which gives a gummy inside effective edge without the instability that competitors experience on the outside of the tread. Simply put, bigger sipes flex more than smaller sipes. This unique siping pattern creates asymmetrical tread flex and translates into a predictable, confident, and communicative feel at the limit of cornering. Mazza's generous tread depth claws into a range of terrain and is stabilized with Vittoria's proprietary 4C compound layering process. Four separate Graphene 2.0 compounds are layered, allowing the surface of the tread to remain tacky while the base remains planted. This ensures each effective edge is kept in place under high cornering and braking loads, leading to reduced rolling resistance and increased wear life. The bar has been raised. - Aggressive profile with ample sipe spacing for mixed terrain - Progressive sipe width for tactile grip on rocks and roots - Stepped leading-edge center-tread maintains speed and delivers climbing traction

The new Vittoria Mazza combines years of athlete input with cutting-edge tread technology, raising the bar on the mixed terrain Enduro tire category. Starting with a defined center tread, the Mazza uses deep siping in the direction of rotation, allowing the tire to roll fast while still opposing drift, especially in off-camber terrain. The stepped leading edge rolls like a ramp but digs in on climbs, making Mazza a top choice for both front and rear use. Substantial spacing was designed into the center tread to provide braking traction, while also accelerating mud clearing. Cornering on the Mazza is handled by Vittoria's trademark progressive sipe width technology, which gives a gummy inside effective edge without the instability that competitors experience on the outside of the tread. Simply put, bigger sipes flex more than smaller sipes. This unique siping pattern creates asymmetrical tread flex and translates into a predictable, confident, and communicative feel at the limit of cornering. Mazza's generous tread depth claws into a range of terrain and is stabilized with Vittoria's proprietary 4C compound layering process. Four separate Graphene 2.0 compounds are layered, allowing the surface of the tread to remain tacky while the base remains planted. This ensures each effective edge is kept in place under high cornering and braking loads, leading to reduced rolling resistance and increased wear life. The bar has been raised. - Aggressive profile with ample sipe spacing for mixed terrain - Progressive sipe width for tactile grip on rocks and roots - Stepped leading-edge center-tread maintains speed and delivers climbing traction

The Mazza Race has been developed to provide the best combination of riding feeling and performance for technical trails at maximum speed. Deep siping allows the tire to roll fast while still opposing drift, especially in off-camber terrain. The stepped leading edge rolls like a ramp, but digs in on climbs, making Mazza a top choice for both front and rear use. - Generous tread depth claws into a range of terrain, and is stabilized with Vittoria’s proprietary 4C compound layering process, allowing the surface of the tread to remain tacky, while the base remains planted - Wach effective edge is kept in place under high cornering and braking loads, leading to reduced rolling resistance, and increased wear life - Substantial room was designed into the center tread to provide braking traction, while also accelerating cleaning - Cornering is handled by Vittoria’s trademark progressive sipe width technology, which gives a gummy inside effective edge, without instability - New Enduro Race Casing with insert below the tread provides additional puncture protection

The Mezcal is the versatile all-rounder that gets you to the podium, time after time. Ride a combination of terrain? This is the choice of the pros. The Mezcal features a unique low-profile tread that is tightly spaced in the center for low rolling resistance and durability. Countless effective edges work together to grip a variety of terrain, while directional siping on each knob finds traction in the roots and rocks. The best tires are built with the best casing and compound, and the Mezcal is no exception.

The XCO European Champion tire The Mezcal is the versatile all-rounder that gets you to the podium, time after time. Ride a combination of terrain? This is the choice of the pros. The Mezcal features a unique, low-profile tread that is tightly spaced in the center for low rolling resistance and durability. Countless effective edges work together to grip a variety of terrain, while directional siping on each knob find traction in the roots and rocks. The best tires are built with the best casing and compound, and the Mezcal TNT is no exception. Using the proprietary Graphene enhanced 4C compound, the Mezcal attains the holy grail of XC tires; grip, durability, and low weight. - Defined center-ridge tread for low rolling resistance

The muddiest DH course conditions possible have inspired the Mota DH tire. Intended for use on professionally maintained courses, the moto block spikes cut into soft terrain, providing world-class grip across the slickest surfaces. The Mota tread features the same progressive-width design as the Martello, which provides for a progressive fine-touch tactile feel on the effective edge. When the course demands the most aggressive tires possible, the Mota is your answer. - Ample spacing allows for immediate shedding of mud and debris - Progressive sipe-width pattern provides tactile grip at the knob surface without sacrificing speed or grip

Unstoppable on ups. Relentless on descents Syerra has been developed to satisfy the needs of the emerging Down Country segment, raising the limit of what a XC tire can do. Vittoria engineers combined in a single product Speed and Rolling Performance – typical features of the XC segment – together with High Grip and Resistance – traits of the Trail Segment. The result is a light and fast product which allow to have fun also when tackling burlier descents and gnarlier terrain. - High durability and maximum speed thanks to Graphene and 4 different kind of compounds - Outstanding grip performance: tread design engineered for multiple conditions - Safety and sidewall protection ensured by the Anti-Pinch Flat (APF) sidewall insert

The Terreno Dry bridges the gap between file treads, and traditional all-conditions treads. The key to this is the unique angled "fish scale" design, that allows the center tread to roll extremely fast, yet offer traction when loaded in cornering and braking. Add the transitional height mid and side tread, and the Terreno Dry transitions as smoothly as it rolls. The exclusive 3C Graphene compound structure places 3 unique compounds where you need them most, adding to the performance. From gravel grinding to medium conditions cross racing, the Terreno Dry offers consistent performance. - Center scales are ramped, providing a fast rolling leading edge, yet sharp effective braking and cornering edges - Exclusive 3C compound construction featuring Graphene compound technology - File-tread Gravel and Cyclocross race tire, designed for a range of conditions

e-Martello hammers home the performance you expect, while extending your ride. Looking for the one tire to tackle a wide range of courses? This is the ticket. e-Martello features a 4C Graphene compound combined with a moto-inspired tread design and progressive width siping. This design provides for a progressive feel on the effective edge, allowing for that fine-touch tactile feel that riders expect. Whether shredding rocks, roots, or mixed terrain, e-Martello delivers.

- Size: 27.5 x 2.0 – 2.25 - 4mm wall thickness in the tread area and 2mm in the rim area - ISO Diameter: 584 / 650b / 27.5" - ISO Width: 52mm, 53mm, 54mm, 55mm, 56mm, 57mm, 58mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded

- Size: 27.5 x 2.0 – 2.25 - 4mm wall thickness in the tread area and 2mm in the rim area - ISO Diameter: 584 / 650b / 27.5" - ISO Width: 52mm, 53mm, 54mm, 55mm, 56mm, 57mm, 58mm - Tube Compound: Butyl - Valve: Long Schrader - Valve Core: Removable

- Low Lead Valve - ISO Diameter: 203 / 12.5 - ISO Width (mm): 57mm - Labeled Size: 12 x 2-1/4 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth

- Size: 14 x 1.5 – 2.25 - ISO Width: 44 – 55mm - ISO Diameter: 254 / 14" - Wall Thickness: 0.9 - Shaft Type: Smooth - Valve: Standard Schrader - Valve Core: Removable - Tube Compound: Butyl

- Low Lead Valve - ISO Diameter: 305 / 16" BMX - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 76g (1.25-1.5), 92g (1.5-1.75), 102g (1.75-2.125)

- Low Lead Valve - ISO Diameter: 355 - ISO Width: 44mm , 45mm , 46mm , 47mm , 48mm , 49mm , 50mm , 51mm , 52mm , 53mm , 54mm - Labeled Size: 18 x 1.75-2.125 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 118g

- ISO Diameter: 406 / 20" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Valve Shaft: Threaded - Valve Core: Removable

- ISO Diameter: 406 / 20" BMX - Wall Thickness: 0.9mm - Tube Compound: Butyl - Valve: Standard Schrader - Shaft Type: Smooth - Valve Core: Removable

- ISO Diameter: 507 / 24" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded Note: This product may have different packaging than pictured with a slightly different labelled size. Rest assured, the size range on the package will have the same or a broader functional range as the listed sizing of the product you ordered.

- ISO Diameter: 507 / 24" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Standard Schrader - Shaft Type: Smooth - Valve Core: Removable

- Size: 26 x 1.9 – 2.125 - ISO Diameter: 559 / 26" mtn - ISO Width: 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 170g (32mm), 171g (48mm)

- ISO Diameter: 559 / 26" MTN - ISO Width: 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm - Labeled Size: 26 x 1.9-2.125 - Tube Compound: Butyl - Valve: Long Schrader - Valve Core: Removable - Valve Shaft: Smooth

- ISO Diameter: 559 / 26" mtn - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 102g (1-1.25), 165g (1.5-1.75), 174g (1.9-2.125), 198g (2.1-2.3), 281g (2.4-2.75)

- ISO Diameter: 584 / 650b / 27.5" - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded

- ISO Diameter: 584 / 650b / 27.5" - ISO Width: 52mm, 53mm, 54mm, 55mm, 56mm, 57mm, 58mm - Labeled Size: 27.5 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Schrader